Model RC (Request form #VRC1)
- Dual relief, differential poppet style for cylinders or motors of equal displacement to cushion shock or surge pressures.
- Adjustable or non-adjustable. 500 to 3000 psi.
- 30 gpm capacity, ductile iron body.
Model RD (Request form #VRD1)
- Hydraulically dampened differential poppet-style relief valve.
- Adjustable or non-adjustable. 500 to 3000 psi. 30 gpm capacity.
Model RV (Request form #VRV1)
- Pilot operated relief valve.
- Adjustable from 400 to 3000 psi.
- 40 gpm capacity.
Directional Control Valves
Model SS (Request form #VSS)
- Up to 9 gpm, 3000 psi, ductile iron body
- Series operation
- Single unit or multi-function operation with stackable capabilities
- Excellent spool metering, low leakage, manual and float detents available.
Model AD (Request form #VAD2)
- 15 gpm, 3000 psi, 1 or 2 spool model with intergral relief and loadchecks.
- Excellent metering, low leakage.
- Variety of spool types and actuator options
- Power beyond and closed center available
Model BA (Request form #VBA1)
- 1, 2 or 3 spool valve, 30 gpm, 2500 psi.
- Excellent metering, integral differential poppet-type relief and load checks.
- Variety of spool types and actuator option.
- Power beyond and closed center available.
Model BP (Request form #VBP)
- Controls cylinder or motor speed and direction with a variable voltage input signal
- Allows for remote mounting of electronic input controllers
- 0 - 12 Volt DC, SAE ports
- 3000 PSI working pressure, 25 GPM, closed center
- Cylinder port load checks, internal pilot and drain
- High tensile strength cast iron body, select fit spools, Buna N seals
- Single spool, manually adjustable, built-in pressure compensated priority type flow control
- Characteristics and options similar to BA except open center only.
C Series (Request form #VCA1)
- 1 or 2 spools, 30 gpm, built-in relief, pressure balanced hard chrome spools are select fit honed.
- Available in 3-way and 4-way configurations, open or closed center, variety of detent options
Model CA - manual version, spring centered
Model CD - automatic pressure kickout version
Model CS - solenoid operated version
Converta (Request form #VCV9)
- Single spool standard model, open center only
- Simple field conversion from 4-way to 3-way as well as spring centered to manual detent.
Model DV (Request form #VDV1)
- Compact, space saving loader valve, 8-10 gpm or 15 gpm, 3000 psi
- Parallel operation, excellent metering, integral differential poppet-type relief and load checks
- Open center: 4 way, 4 position (float) on first spool;
4 way, 3 position or regen on second spool
- Handles or joystick
(Request form #VVS)
- 20 gpm, 3000 psi, 3 ported, diverts flow to either of two separate circuits
- 40 gpm, 3000 psi, 3 ported, diverts flow to either of two separate circuits.
- Handle, knob, detents, spring centering as well as solenoid operated options.
(Request form #VSD1)
- 40 gpm, 3000 psi, 6 ported, diverts flow to either of two separate circuits using a single control valve.
- Handle, knob, detents, spring centering as well solenoid operated options.
(Request form #VSD5)
- Rated to 5000 psi, 50 gpm, ductile iron body
- Designed for use with hydrostatic transmissions to permit selection of either 2 wheel or 4 wheel mode.
(Request form #VSQV)
- Alternately operate a pair of agricultural guide marker systems on a row marker system.
- 2 position, 3 port.
(Request form #VFD1)
- Proportional flow divider for use as anti-spin out valve for hydrostatic transmission.
- 5000 psi, up to 50 gpm.
- Bias pressure compensated.